NEW low flow spa control system, complete, model C5/CLT7, controls a 2 speed main jet pump and a low flow circ pump, plus light, and receptacle for an ozonator too, with pump power cord, circ pump cord, light cord, users manual, and digital topside display. A very nice replacement control works on most any low flow hot tub or portable spa, replacing your old control and heater. Includes stainless steel low flow 5kw heater, 3/4" connections. The listing includes ground shipping fee to lower 48 states! These are built to order, so please allow a few days to build to your specs and then ship out.
GRAB15 A very complete kit with topside and 4 cords for: jet pump, circ pump, topside, and light. ALL OTHER CORDS WOULD BE OPTIONAL COST. Message us in classifieds board before you buy if you need voltage changes or optional extras added, please. As shipped runs a 2-speed jet pump, and low flow circ pump and a light. Optional cords allow other devices to be run, just message us in classifieds board BEFORE you buy for a quote on your requested options.
Additional detail: -This CLT7 Control comes with 5kw low flow heater, 2.5x5.0" Topside display/keypad, jet pump and circ pump and light cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4" round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. -Runs a main 2 speed jet pump, and a circ pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. -Comes with new power cords for your main 2-speed jet pump and a circ pump, and a light, with quick disconnect plugs to the control.
-Optional purchase of extra cords not included can power an audio system, air blower, an additional device like another jet pump, and an ozonator, see our other listings for these optional cords. - Temperature sensor is built in. -Includes stainless steel low flow heater, with 5kw titanium element. Can be used on 115/120v or 230/240 volts, it's changeable voltage-wise. -the CLT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power.
Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CLT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the jet pump. 115/120v to the circ pump, and 12 volts to the light. You can ask us and we can change voltages for you and test prior to shipping.
Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down. Note that there is an in and an out marked on the heater. Can be fitted to 3/4" vinyl tubing size systems. Easy to adapt to 1" tubing if you care to.
-User's Manual shows how to program changes into the control, but it is factory programmed, and tested, and ready to go as is. Nice unit, replaces most any existing spa control system, and is less costly than buying a new motherboard and topside in most cases. Factory Warranty 12 months from date of manufacture against factory made defects, does not cover abuse, mis-wiring, lightning strikes, labor, freight, etc. Control box stands 8.6" tall, and 20.6" wide, 5.8" deep. Designed, built and tested in the U.S., a rugged, proven, spa control, good tech support, good parts availability, made in California.
Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. This goes out within 2 business days after receipt of payment via ground shipping, to your street address, sorry, no P.O. Boxes. Shipping included is to LOWER 48 STATES ONLY. Questions? Please ask before you buy, please.
Package includes: CLT7 Digital Control by United Spas model C5 stainless steel low flow 5kW heater with standard 3/4" barbed fittings. Digital display keypad (topside) 2.5x5.0" with 9.5 foot long cord. Drops into 1-3/4" round cutout. One pump power cord 4-wire for a 2-speed pump, 45" long with quick disconnect AMP plug and motor connectors. 14/4 wire size.
Circ pump power cord with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. United Spas T7 Topside Installation Manual & User's Guide. United Spas C5 Series Installation & Service Manual.
Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Warranties do not cover freight costs. Standard stuff, but just fyi, so you are aware.
United Spa Controls One Year Limited Warranty is listed on the last page in your owners manual.
Add new question to the seller