Softub Digital Pump Motor Pack Heater Softtub Soft Hot Tub Spa

Softub Digital Pump Motor Pack Heater Softtub Soft Hot Tub Spa The left side of the power pack control panel is in working condition it goes from 80 to 104 degrees. It was tested and shuts down at 80 degrees No further testing was done. Copy and paste the video link below to watch the short video of the thermostat shutting down at 80 degrees. https://drive.google.com/file/d/1_t6b5vGmJ7Q-ZT2xCqQarGVOgHrITo7V/view? Usp=sharing Unfortunately the right side of the control panel does not seem to be functioning. The "light" button is not lighting the light in the tub and the red light for the heat is not lighting up.

Even though the heat light does NOT light up, the unit WILL HEAT as the motor runs. This can take close to 48 hours when you first fill the tub with cold water. If your motor is running, IT IS HEATING AS WELL. The spa water is heated using a patented heat recovery system, which uses waste heat from the motor to heat the water.A heat exchanger coil wrapped around the motor transfers heat to the water in the coil while the pump circulates the heated water through the tub. This has a new GFCI.

The impeller and seal were also replaced and there are NO leaks coming from the motor. ($420 repair see last pic) I am selling this unit for parts/repair AS IS because if you want a fully functioning unit with a working "light" feature to light the light in your tub, you will have to purchase a new control panel. If your tub does NOT have a light then this will work good for you. The jets can be turned on manually by using the round knob. When it's on the left position the jets are not fully pushing water through the jets but twisting the knob to the right fully opens the jets (see pics) Being sold in AS IS condition NO returns please.I have described this unit to the best of my knowledge.Interior has been photographed and all serial numbers recorded.

The pump motor is covered with LeatherTex, a marine-grade vinyl. The foam insulation inside the motor pack was brittle and disintegrating so it was removed. You can wrap foam around the pvc piping to retain the heat. Will be shipped UPS Ground fully insured. Thanks for stopping by!