Leak Sealer 1Lt Swimming Pool Hot Tub Pipework Concrete Fibreglass Minor Seal

1 Litre Swimmer Leak Sealer Benefits Seals minor leaks in most swimming pools & spas Can seal leaks losing up to 1" of water per day No need to empty pool or spa Fast acting - usually stops leaks in 24 hours Important Notes NOT suitable for repairing leaks in vinyl liner pools Larger defects require proper plumbing and maintenance This product should not be used when the rate of water loss exceeds 1" per day in a 15,000 gallon pool If using an automatic pool cleaner, remove the cleaner from the pool Do not allow Leak Sealer to pass through filtration system Do not exceed recommended dosage rate Sizes Dosage One litre treats 15,000 gallons pool water What is Lo-Chlor Leak Sealer? Lo-Chlor Leak Sealer is an amazing special compound that has been developed to help seal minor cracks and leaks in swimming pools. A leaking pool is every pool owner's nightmare. Lo-Chlor has developed an easy way to plug minor leaks. How does Leak Sealer work?

Leak Sealer has a very high pH (about 12) so when you add it to your pool it takes on the pH of pool water (between 7.0 and 8.0). It now no longer functions as a liquid and starts to solidify in the presence of oxygen at the site of the leak. To ensure best results, please follow the instructions outlined below. Instructions Turn the pool pump OFF. Set the filtration to BY-PASS or RECIRCULATE to avoid the Leak Sealer passing through the filtration system elements when the pump is running.

If by-pass or re-circulate is not available, remove filter grids or cartridges from the filter... Leak Sealer will clog the filter system if allowed to pass through it. If leak location is unknown, add the required volume of Leak Sealer via the skimmer box. Turn the pump off for at least 30 minutes. This allows the Leak Sealer to work slowly through the pipes (this is where 90% of leaks happen, so it makes good sense to allow maximum contact time in this area). If you are sure of the location of the leak, (ex.

Around a light or the skimmer) pour Leak Sealer directly in the water in the vicinity of the leak. Where possible, attach a vacuum hose with vacuum head resting at the deepest point in the pool (normally next to the main drain). Leak Sealer is much heavier than water, so it tends to sink quickly to the deepest point in the pool. The positioning of the vacuum head in this region will assure maximum effect of the product when the pump is turned back on. After 30 minutes have passed, turn the pump on.

Allow pump to run for at least 8 hours (24 if possible). The pool should be checked to see if it is still losing water. Minor leaks may benefit from a second application where the leak appears to have slowed but not sealed completely from the initial application. Second application can be made within the next 24 hours. Replace the filter grids or cartridges after 24 hours and resume normal filtration.

Castle Hot Tubs is a well established, trusted name in the water care industry, we will do our very best to ensure that your purchasing experience with us is a pleasant one. If for any reason you are not 100% happy with our service, we will put it right, so please do contact us directly before leaving a negative feedback! Thank you! Postage We make every attempt to despatch goods as soon as payment is received. Goods ordered before 1pm will be sent out on the same day.

Our couriers deliver from MON-FRI anything ordered at weekends or bank holidays will be posted on the following working day. If you require delivery to the Scottish Highlands & Islands, Isle of Man, Scilly Isles, Channel Islands, Northern Ireland or outside of the UK mainland please contact us for a postal quote before making your purchase. Thank you.