Hot Tub Pump - 1hp Ultra Jet 1.5" W/ Thermal Wrap Heat Jacket - BN25

Spa Hot Tub Pump 1HP with Pre-Installed "Thermal Wrap" Heater Jacket For spas and hot tubs requiring 1 speed motors Motor Description: Motor Description: Mfg: Century HP: 1 RPM: 3450 Single Speed 115 Volts 11.8 - 12 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N: 1215116 (Identical to PKUL10SDCS, phone2) 1HP 1 1/2" Center Suction x Side Discharge (2" connections available) Great Value - Direct From The Manufacture of the patented Thermal Wrap - Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System) For information on the "Thermal Wrap" Heat Jacket. It's like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor.

More about the Thermal Wrap - Heat Transfer System: Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water - were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat "energy" produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out.

Made in the USA! Efficient:- Patented design, over 1,000,000 in use- Special thermal conductive inner heat transfer liner- Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps Economical:- Maintenance free - no moving parts to wear out- Helps keep motor cooler - increases motor longevity and efficiency- Cost less than electric heaters- No additional electrical circuits required for installation Safe:- Manufactured of non-conductive materials- Non electrical- Self draining design (required for whirlpool bath application) Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat generated by your pump motor and delivering that heat to the tub water, saving you money with heating costs. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. Visit our classifieds board Store for more pumps, motors and controls for your hot tub. Please contact us for international shipping costs.

Thank you!