Beluga - Solar Pool Heating Device - Use A Garden Hose To Heat Your Pool!

Beluga Solar Pool Heating Device The little Pool Heater that makes a whale of a difference! Installation Requirements: Circulation Pump1½-inch Threaded Connector at Water Inlet to PoolGarden Hose (black rubber hose works best)Sun! Instructions: Turn off the pool pump.Screw the Device into the pool inlet. Attach a garden hose to the outlet at the top of the Device. Lay the hose in a sunny area.Place the discharge end of the hose over the pool.

Turn on the pool pump.Adjust the cap on the face of the Device towards a closed position to force water into the garden hose. You may need to aggressively close the cap to fill the garden hose. Once water is flowing from the opposite end of the hose, adjust the flow to approximately a ½-inch diameter or smaller stream. Remember: The longer the water is in the hose, the warmer the water will be when it exits. To increase the temperature of water entering the pool, use the longest hose that your space allows.To reduce heating time, adjust the water flow to maximize the size of the stream at the time of day when the temperature is the hottest.Works best in conjunction with a solar cover.

Warnings: Always make sure the discharge end of the hose is located securely over the pool.To avoid damage or injury, remove the Device when the pool is in use.The Beluga device is NOT designed to pump water to high elevations such as roofs of houses. Using the device in this manner will damage the unit and may damage your pump. Please do not use the device to lift water more than 5' from the pool inlet.To prevent damage consult your pump manual before installing the Beluga device. Check our classifieds board store and website for other great deals! Our company name is Pool Spa Supplies, and our reputation is exemplary.

Please add us to your list of favorite sellers and visit our store often. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help!