Balboa VS501Z Spa Controller Kit w/ Topside, 54220-ZThe Balboa Spa Controller VS501Z Kit is configurable. Internal component circuits are setup to work with your existing pump, blower and ozone, so you don't have to do any internal wiring. OEM part number for the kit is 54220-Z. This kit has been lightly used and is in excellent working condition. SpaGuts P/N: 10-175-2001 This controller operates on 110/220V (220V requires 4-wire service).
The VS501Z controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump. Features:One pump circuit, two speeds, 110/220V, 12A MaxBlower or Pump 2 circuit, 1-speed, 110/220V, 10A MaxCirc Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)Ozone circuit, 110/220V, 1A MaxAudio/Video circuit, 110/220V, 2A Max (Constant Circuit)12V 12W Light circuit with socket and reflector that fits most existing light housing, 8ft cord1.4/5.5KW, 120/240V Flo-Thru Incoloy High Flow heater with M7 technologyStainless steel heater housingNo Pressure Switch. Heater can be installed on suction or discharge side of pump48 inch amp motor, blower and ozone cordsMini Oval Topside Panel, 52144UL and ETL listed for your safetyFreeze protectionHigh-limit protectionFiltration modeEconomy ModePair of 2 inch Heater Tailpieces with O-Ring GasketsTopside Cover Plate, 11718Additional Topside Overlay, 111271-Year Limited Warranty (Extended Warranty Option is available upon ordering)Controller Dimensions are 12" L x 11" H x 4.5" W (approx) Heater Dimensions are 15" L x 2" Diameter (approx) Topside Panel Dimensions are 4.25" L x 1.5" W (approx) Topside Cover Plate Dimensions are 8.5" L x 3.5" W (approx) On Sep-17-17 at 18:41:57 PDT, seller added the following information: Balboa VS501Z Spa Controller Kit w/ Topside, 54220-Z This kit has been lightly used and is in excellent working condition. The list price is about $800, and the discounted price is about $650, so the buyer if this replacement controller/heater will be getting a great deal. This is an incredibly inexpensive way to repair your spa yourself.
The Balboa Spa Controller VS501Z Kit is configurable. Internal component circuits are setup to work with your existing pump, blower and ozone, so you don't have to do any internal wiring. OEM part number for the kit is 54220-Z.SpaGuts P/N: 10-175-2001 This controller operates on 110/220V (220V requires 4-wire service). The VS501Z controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump. Features:One pump circuit, two speeds, 110/220V, 12A MaxBlower or Pump 2 circuit, 1-speed, 110/220V, 10A MaxCirc Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)Ozone circuit, 110/220V, 1A MaxAudio/Video circuit, 110/220V, 2A Max (Constant Circuit)12V 12W Light circuit with socket and reflector that fits most existing light housing, 8ft cord1.4/5.5KW, 120/240V Flo-Thru Incoloy High Flow heater with M7 technologyStainless steel heater housingNo Pressure Switch.
Heater can be installed on suction or discharge side of pump48 inch amp motor, blower and ozone cordsMini Oval Topside Panel, 52144UL and ETL listed for your safetyFreeze protectionHigh-limit protectionFiltration modeEconomy ModePair of 2 inch Heater Tailpieces with O-Ring GasketsTopside Cover Plate, 11718Additional Topside Overlay, 111271-Year Limited Warranty (Extended Warranty Option is available upon ordering)Controller Dimensions are 12" L x 11" H x 4.5" W (approx) Heater Dimensions are 15" L x 2" Diameter (approx) Topside Panel Dimensions are 4.25" L x 1.5" W (approx) Topside Cover Plate Dimensions are 8.5" L x 3.5" W (approx)
Add new question to the seller